参考文献(References)：
[1] YU H,LIAN Z H,LIN T J,et al.Experimental and numerical study on casing wear in highly deviated drilling for oil and gas[J].Advances in Mechanical Engineering,2016,8(7):1-15.
[2] 党兴武.基于35CrMo/GCr15摩擦副的疲劳磨损机理研究[D].兰州：兰州理工大学，2017.
[3] MATSUMOTO K,SAGARA M,MIYAJIMA M,et al.Study of oil country tubular goods casing and liner wear mechanism on corrosion-resistant alloys[J].SPE Drilling & Completion,2018,33(1):41-49.
[4] PARK C Y,RHEE H,RYU K W.Wear depth prediction for steam generator tubes using an estimated in situ wear coefficient[J].Nuclear Technology,2018,201(1):23-40.
[5] YU H,TALEGHANI A D,LIAN Z H.Modelling casing wear at doglegs by incorporating alternate accumulative wear[J].Journal of Petroleum Science and Engineering,2018,168:273-282.
[6] GUO J,FAN S,LIU T,et al.Exploration and practice of integrated control technology for tubing and sucker rod lopsided wearing in directional well[C]//2018 International Conference on Air Pollution and Environmental Engineering (APEE 2018),October 26-28,2018,Hong Kong,China:Vol 208.Bristol:IOP Publishing,2018:012021.
[7] 徐学利，王涛，余晗，等.低摩擦速度下CT80油管摩擦磨损性能[J].润滑与密封，2019,44(2):66-71.
[8] GUO X Q,LIU J,DAI L M,et al.Friction-wear failure mechanism of tubing strings used in high-pressure,high-temperature and high-yield gas wells[J].Wear,2021,468/469(2):203576.
[9] MAO L J,CAI M J,TIAN J,et al.Effect of drilling fluid type on wear behavior of casing[J].Journal of Materials Science and Engineering,2020,38(3):482-487.
[10] MAO L J,CAI M J,WANG G R.Effect of rotation speed on the abrasive-erosive-corrosive wear of steel pipes against steel casings used in drilling for petroleum[J].Wear,2018,410/411:1-10.
[11] 温诗铸，黄平，田煜，等.摩擦学原理[M].5版.北京：清华大学出版社，2018.
[12] 王志信，蔡景瑞.射孔对套管的损害及改进措施[J].测井技术，1984(5):33-37.
[13] 唐波，杨龙，练章华，等.射孔套管应力集中系数有限元分析[J].西南石油学院学报，2003,25(4):69-72.
[14] AI C,ZHAO W C,GUO B Y.Casing collapse strenth reduction under lateral loads from yielding shales in the Daqing Oilfield[J].SPE Drilling & Completion,2008,23(4):348-352.
[15] 张建忠，靳鹏菠，刘锋，等.出砂套管受力有限元分析[J].新疆石油天然气，2011,7(1):66-67,75.
[16] 张立民.冀东油田出砂井射孔套管变形分析[J].石油钻采工艺，2013,35(5):71-73.
[17] GUO Y G,BLANFORD M,CANDELLA J.Evaluating the risk of casing failure caused by high-density perforation:a 3D finite-element-method study of compaction-induced casing deformation in a deepwater reservoir,Gulf of Mexico[J].SPE Drilling & Completion,2015,30(2):141-151.
[18] SCHEPERBOER I,EFTHYMIOU E,MALJAARS J.Deformation of perforated aluminium plates under in-plane compressive loading[J].Key Engineering Materials,2016,710:357-362.
[19] 姬丙寅，曹传文，刘彦，等.套管射孔后抗挤强度有限元分析[J].钢管，2018,47(2):72-75.
[20] 李明飞，窦益华，曹银萍，等.考虑套管边界和液柱高压的射孔液压力脉动规律分析[J].振动与冲击，2019,38(24):189-196.
[21] 逄铭玉，许高，唐英才，等.井下环境固井水泥环射孔冲击破坏实验研究[J].测井技术，2019,43(4):348-354.
[22] 孙宝江，彭玉丹，张伟国，等.筛管压溃强度计算公式及适用性[J].石油学报，2020,41(3):363-371.
[23] 许杰，贾立新，陈毅，等.海上稠油热采井套管射孔参数设计[J].中国海上油气，2020,32(3):118-123.
[24] 李明飞，窦益华，曹银萍，等.射流速度及套管应力的ALE三维仿真分析[J].力学季刊，2019,40(2):362-372.
[25] 黎伟，陈曦，夏杨，等.机加工孔套管抗挤压强度有限元分析[J].过程工程学报，2020,20(2):189-196.
[26] 曹银萍，李明飞，窦益华，等.爆轰与聚能射流下射孔枪和套管的应力强度耦合仿真分析[J].石油钻采工艺，2019,41(4):480-488.
[27] 李明飞，窦益华，刘玉雪.射孔套管应力强度及影响因素仿真分析[J].计算机仿真，2020,37(3):100-105,133.
[28] 陈华彬，唐凯，李妍僖，等.爆炸耦合载荷作用的射孔套管强度模拟分析[J].石油矿场机械，2020,49(3):15-23.
[29] TIMOSHENKO S P,GOODIER J N.Theory of Elasticity[M].3rd ed.London:McGrawHill Book Company,1970.
[30] 张皓斌.厚壁圆筒强度及开孔补强的分析与讨论[J].化工设计，2020,30(6):19-24.
